manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Поделиться
Скачать
Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 12

1.5

Training and Documentation

Brainlab Training

Before using the system, all users must participate in a mandatory training program held by a
Brainlab authorized representative to ensure safe and appropriate use.

Supervised Support

Before using the system for surgical procedures where computer-aided navigation is considered
critical, perform a sufficient number of complete procedures together with a Brainlab
representative.

Reading User Guides

This guide describes complex medical software or medical devices that must be used with care.

It is therefore important that all users of the system, instrument or software:

• Read this guide carefully before handling the equipment

• Have access to this guide at all times

Available User Guides

NOTE: Available user guides vary depending upon the Brainlab product. If you have questions
regarding the user guides you received, please contact Brainlab support.

 

User Guide

Contents

Software User Guides

• Overview of treatment planning and image-guided navigation

• Description of OR system setup

• Detailed software instructions

Hardware User Guides

Detailed information on radiotherapy and surgical hardware, typi-
cally defined as large complex instruments

Instrument User Guides

Detailed instructions on instrument handling

Cleaning, Disinfection and
Sterilization Guide

Details on cleaning, disinfecting and sterilizing instruments

System User Guide

Detailed information on system setup

Technical User Guide

Detailed technical information on the system, including specifica-
tions and compliances

System and Technical User
Guide

Combines the contents of the System User Guide and the Techni-
cal User Guide.

Training and Documentation

12

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

Содержание CRANIAL/ENT OPTICAL TRACKING

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды