manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Поделиться
Скачать
Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 63

Ensuring Correct Attachment

When attaching the 

Vario Reference Arm (Mayfield Headholder)

 to the V-inset or headholder,

make sure that the teeth on both components are properly interlocked, and that the surfaces are
parallel to each other.

①

②

Figure 24  

No.

Explanation

①

Teeth correctly aligned

②

Teeth incorrectly aligned

After Registration

Following registration you can drape the patient and attach the sterile 

Standard Cranial

Reference Array

 using the same procedure described for the 

Reference Clamp Universal

.

During Use

Warning

Once the Vario Reference Arm (Mayfield Headholder) has been mounted, do not change the
position by readjusting the central tension handle or the Mayfield “T” Screw. This could
damage the drape, and compromise the sterility and referencing accuracy.

Warning

Do not unscrew the Mayfield “T” screw and/or the central tension handle after patient
registration. The entire coordinate system will no longer be accurate and the instrument tip
incorrectly displayed. Only the fixation nut may be unscrewed to exchange the Standard
Cranial Reference Array.

Warning

Do not move the marker array relative to the patient’s anatomy during later procedures as
this would improperly affect the entire measurement coordinate system and lead to an
incorrect display of the instrument’s tip.

NOTE: Tightly close the central tension handle to prevent unintentional loosening. The Vario
Reference Arm (Mayfield Headholder) has a limited load capacity. Do not load the Vario

REFERENCES

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

63

Содержание CRANIAL/ENT OPTICAL TRACKING

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды