manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Поделиться
Скачать
Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 7

1.3

Symbols

Warnings

Warning

Warnings are indicated by triangular warning symbols. They contain safety-critical
information regarding possible injury, death or other serious consequences associated
with device use or misuse.

Cautions

Cautions are indicated by circular caution symbols. They contain important information
regarding potential device malfunctions, device failure, damage to device or damage to
property.

Notes

NOTE: Notes are formatted in italic type and indicate additional useful hints.

 

Symbols on Hardware Components

The below symbols may be found on hardware components:

Symbol

Explanation

Type B Applied Part

NOTE: Applied parts that are normally not conductive and can be immediately re-
leased from the patient.

 

Type BF Applied Part

NOTE: Applied parts that have conductive contact with the patient, or have medium
or long term contact with the patient.

 

Caution

NOTE: User should consult the instructions for use for important cautionary informa-
tion such as warnings and precautions that cannot, for a variety of reasons, be pre-
sented on the medical device itself.

 

Equipotentiality

NOTE: To identify the terminals which, when connected together, bring the various
parts of an equipment or of a system to the same potential, not necessarily being the
earth (ground) potential.

 

Do not re-use

NOTE: Indicates a medical device that is intended for one use, or for use on a single
patient during a single procedure.

 

Non-sterile

NOTE: Indicates a medical device that has not been subjected to a sterilization proc-
ess.

 

Do not resterilize

NOTE: Indicates a medical device that should not be resterilized.

 

GENERAL INFORMATION

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

7

Содержание CRANIAL/ENT OPTICAL TRACKING

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды