manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Поделиться
Скачать
Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 43

4.4.2

Control LED and Laser Indications

About the LED

①

Figure 15  

The control LED 

①

 displays the status of the infrared laser and the battery.

LED Indications

LED Indication

Explanation

Flashing green

The activation button has been pressed, but the camera is not detected.

Only the visible laser is on. The infrared laser is off.

Solid green

Appears when the camera is detected. Both lasers are activated. The in-
frared laser is delayed and is switched on one second after the visible la-
ser.

Prerequisites:

• Navigation software is in registration mode

• The camera has an unobstructed view of the infrared sensor located

next to the indicator LED

Flashing yellow

Z-touch

 battery is low and the camera is not detected. The battery typi-

cally lasts for one patient registration procedure. Change the battery be-
fore using 

Z-touch

 for the next patient registration.

Only the visible laser is on. The infrared laser is off.

Changing between
yellow and green

Z-touch

 battery is low and both lasers are activated. The battery typically

lasts for one patient registration procedure. Change the battery before us-
ing 

Z-touch

 for the next patient registration.

Solid yellow

If an internal error is detected, both visible and infrared lasers are switch-
ed off and the indicator LED is solid yellow when the activation button is
pressed.

NOTE: If an error is detected, contact Brainlab immediately for advice on
how to proceed.

 

Off

•

Z-touch

 not activated (i.e., button not pressed).

•

Z-touch

 battery is empty and must be exchanged. Both lasers are

switched off.

When the control LED is either solid green or changing between green and yellow, this indicates
that the invisible infrared laser is active. Ensure that no one is subjected to direct eye exposure.

Visible Laser Indications

Aside from the control LED, the visible laser also indicates the status of camera detection. This
enables you to focus on the surface you are scanning while receiving this information.

POINTERS

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

43

Содержание CRANIAL/ENT OPTICAL TRACKING

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды