manualshive.com logo in svg

Brainlab CRANIAL/ENT OPTICAL TRACKING, Руководство пользователя прибора

Поделиться
Скачать
Brainlab CRANIAL/ENT OPTICAL TRACKING Скачать руководство пользователя страница 53

5 REFERENCES

5.1

Standard Cranial Reference Array

General Information

①

Figure 17  

Reference arrays allow the navigation system to track the location of the patient’s head throughout
the procedure.

Reference arrays are generally attached to a headholder using an adapter (or clamp). The type of
adapter used depends on your reference array. The reference array along with the adapter
comprise the reference system.

Each reference array is equipped with a cone 

①

 which you can use to verify the accuracy of

instruments, (e.g., the pointer, 

Softouch

 or suction tubes).

NOTE: For all instruments with spherical or flat tips (e.g., suction tubes), be aware that a tip
deviation occurs when verifying accuracy using the reference array cone.

 

Sterility

Usually, two reference arrays are used:

• One for preoperative procedures (patient registration). The reference array used for registration

may be unsterile as registration is usually performed in an unsterile environment.

• One for intraoperative navigation. The reference array used for navigation must be sterilized

before use and attached during draping.

NOTE: Verify registration accuracy after exchanging the unsterile reference array for the sterile
reference array and verify that it is rigidly fixated.

 

REFERENCES

Instrument User Guide Rev. 2.6 Cranial/ENT Optical Tracking

53

Содержание CRANIAL/ENT OPTICAL TRACKING

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды