Brady BP-IP300, Руководство пользователя

Страница: 72 / 75

Basic Troubleshooting Guide
65
No Ribbon
Detected
Supply missing RFID tag. Verify compatible supply has
been loaded, if supply is correct
select enter to bypass the error
and the printer will load primary
ribbon settings for Hassle Free
mode.
No SMTP server
Printer is configured to
send error messages to
the server but the IP
address of the recipient
can not be found. • Check that the IP address is
correct and if the recipient is
available.
or
• Go to the
settings
menu
and turn
SMTP
off, then recycle
power to the printer.
Not a
Recommended
Ribbon, Use
XXXX instead
Ribbon does not match
Primary ribbon
compatibility selection. Install recommended ribbon or if
supply loaded is secondary option
select enter to bypass the error
and the Printer will load Primary
Ribbon settings for Hassle Free
mode.
Out of paper
Labels missing on the
label material. Replace label material or press
the
pause key to continue
printing.
Out of ribbon
Out of transfer ribbon. Insert new transfer ribbon.
Transfer ribbon melted
during printing. • Cancel the current print job.
• Change the heat level through
the software.
• Clean the printhead (refer to
Cleaning the Printhead and
Media Feed Rollers on
page 60
).
• Load the transfer ribbon (refer
to Loading the Ribbon on
page 23 ).
• Restart the print job.
The ribbon is improperly
installed. • Cancel the current print job.
• Reinstall the ribbon (refer to
Loading the Ribbon on
page 23
).
• Restart the print job.
Error messages Cause Remedy