Brady BP-IP300, Руководство пользователя

Страница: 46 / 75

Control Panel
39
Status Print
The
Status print
function prints a test image containing information on the
configuration and status of the printer. The printout occurs using the heat level
and print speed specified in the
Setup > Print param.
menu.
NOTE: Continuous media is most suitable for this function.
1. Press the menu key.
2. Select
Test > Status print
menu.
3. Press the key.
You can cancel the printout with the cancel key.
The printout contains the following information:
■
Device type
■
Version and creation date of the firmware
■
Version and creation date of the system loader (bootloader)
■
Current values of selected local settings (refer to Local Settings on
page 47 )
■
Current values of selected device settings (refer to Device List on page 41 )
■
Current values of selected print parameters (refer to Print Parameters on
page 50 )
■
Current values of selected interface parameters (refer to Interfaces on
page 52 )
■
Status of PIN activation (refer to Security on page 53 )
■
Operation time
■
Number of labels printed
■
Printed length with thermal transfer printing and thermal direct printing
■
Current measured values of the printhead temperature and heat voltage
■
Information about the label sensor
■
Lines used to evaluate the print quality