Brady BP-IP300, Руководство пользователя

Страница: 34 / 75

Loading the Ribbon and Material
27
Reading the LCD Display
The use of Brady-brand supplies and LabelMark, BradySoft or IdentiLab
labeling software allows access to the full operation of Brady mode. For
detailed information about Brady mode, refer to
Brady Mode on page 14 .
The LCD display should read Ready and display the type of material loaded
into the printer as well as the type of ribbon loaded.
Figure 22 is an example
of a typical display.
Figure 22, Typical Ready Display
If the printer is in a state other than Ready , refer to the “ Basic
Troubleshooting Guide on page 62 to determine what the problem might be.
If the printer is operated with non-Brady software and/or non-Brady labels, the
printer will function only as a standard THT printer. Refer to
Standard Mode
on page 16 for additional information.
1. Designates printer in Brady
mode
2. Online printer status
3. Sensor position
4. Ribbon number and
estimated amount remaining
5. Material part number and
estimated amount remaining
R60XX
1
2
5
4
3