8
Euro Style Restroom Partitions, Phenolic LT — FLOAT Series
Installation
12/10/2021
Bradley •
AD3-FLOAT_Install Rev. A
Mark the drill holes for the top brackets . Place the
brackets flush with the lower edge of the retaining
block .
G
Using a 4 .2 mm drill bit, pre-drill holes through the first
panel only .
H
Tightly secure the heavy brackets (105/60/30/8) using
4 .8 x 32 mm countersunk screws .
I
Place the upper retaining heavy block against the
brackets and push onto the upper edge of the
middle panel, and then secure the block using a
4 .8 mm x 70 mm countersunk screw .
J
L-bracket holes are offset so the screws do not
interfere with each other.
