6
Euro Style Restroom Partitions, Phenolic LT — FLOAT Series
Installation
12/10/2021
Bradley •
AD3-FLOAT_Install Rev. A
3 Installing U-Bracket on Middle Pilasters
Verify the correct pilasters are selected by matching
the label on the pilasters with what is indicated on the
submittal drawings.
Pay close attention to the latch side versus hinge side,
in addition to the in-swing or out-swing.
Determine the centerline of the pilaster and then draw
a full-length line along the pilaster . There may be a
custom dimension indicated on the submittal drawing .
Place the U-bracket on the interior pilaster flush with
the bottom, and then mark the drill holes .
A
B
Using a 4 .2 mm drill bit, drill the holes through the
surface of the first panel only, and then attach the
U-bracket using 5 .5 mm x 25 mm pan head screws .
Make sure the lower hole catches part of the interior
aluminum frame at the bottom edge of the pilaster .
C
