4
Euro Style Restroom Partitions, Phenolic LT — FLOAT Series
Installation
12/10/2021
Bradley •
AD3-FLOAT_Install Rev. A
2 Making Notches (if necessary)
This step may not be necessary, depending on the layout.
Determine whether the shelf is at a right angle.
If several notches are required, align the height of the
U-brackets using a laser level.
Measure the height of the shelf on the back wall and
subtract the specified ground clearance at that location
from this dimension .
A
Shorten the mitered pre-cut U-bracket to the correct
size . Place the U-bracket with the miter end up,
making sure that it is flush with the top of the shelf .
B
Adjust the remaining piece of the long U-bracket to the
height of the system, and then attach the U-bracket,
setting it perpendicular to the wall .
C
Transfer the notch dimension with the addition of
0 .20" clearance to the partition panel, and then use a
circular saw to make the notch .
E
Adjust the short miter U-bracket, and then attach it to
the shelf .
D
