Bowa ARC 250, Руководство по эксплуатации

Страница: 47 / 92

6 Operation
900-301_IFU-V2.2_11316-S0-20131023-EN Operating Manual ARC 250 / 303
47
6.4.5. Menu program 3A "GastroCut-Modes"
For more information on "GastroCut-Modes", see section "GastroCut"
mode, page 27.
You can configure a control tone for each cutting pulse in the
"GastroCut" program. This setting can only be made in the Service
program, and it applies to both "Gastro LOOP" and "Gastro KNIFE".
Changing the cutting speed for "Gastro LOOP"
1. Press the power limitation key for monopolar cutting 4 .
2. Press the key for scabbing level 5/6 to swicth between
slow "Gastro LOOP" (non-accelerated),
dynamic " Gastro LOOP" (medium speed; default), and
fast dynamic " Gastro LOOP" (accelerated).
3. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
Changing the cutting speed for "GastroCut Pap"
1. Press the power limitation key for monopolar cutting 4 .
2. Press the key for monopolar coagulation 10/11 to swicth between
slow "Gastro KNIFE" (non-accelerated),
dynamic " Gastro KNIFE" (medium speed; default), and
fast dynamic " Gastro KNIFE" (accelerated).
3. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
Enabling or disabling the control tone for cutting pulses
1. Press the power limitation key for monopolar cutting 4 .
2. Press the key for power limitation bipolar coagulation 23/24 to
enable or disable the control tone for cutting pulses.
3. Press the power limitation key for monopolar cutting 3 to return to
the menu programs.
Pos : 54 /679-BOWA/HF- Ger äte/ARC 200/250/300e/6 Bedi enung/M enü- Programm 4 " Show Prev Inf-No" @ 5\mod_1270109901242_6.doc @ 38626 @ 3