Bowa ARC 250, Руководство по эксплуатации

Страница: 52 / 92

7 Detecting and correcting faults
52
Operating Manual ARC 250 / 303 900-301_IFU-V2.2_11316-S0-20131023-EN
Error no.
(INF) Signals/
System
events Cause Corrective measures
1
Defective cable or output set too low

Check/Replace the cable.

Set the output higher.
2
Defective cable or output set too low

Check/Replace the cable.

Set the output higher.
6
Internal error

Restart the device. If the error recurs,
contact the service center.
11
Constant power is output at a constant
resistance over a longer period.

Check the connection and the
accessories.
22
Internal error

Restart the device. If the error recurs,
contact the service center.
40
Additional device ARC PLUS not
connected / not switched on / offline

Switch the additional device
ARC PLUS on.

Check the connection to the interface.
43
Key on front panel pressed when
switching on the unit

Switch on the device with the on/off
switch
27 while taking care not to
press any other key at the same time.
44
Finger or foot switch activation is
pending when the device is switched
on

Switch on the device with the on/off
switch
27 while taking care not to
press any other key at the same time.
45
Both keys of the handpiece have been
actuated at the same time

Press only one key of the handpiece
at a time.
46
Both pedals of the double-pedal foot
switch have been activated
simultaneously

Activate only one pedal of the double-
pedal foot switch.