manualshive.com logo in svg

Boston Acoustics Avidea, Руководство по установке и эксплуатации

Поделиться
Скачать
Boston Acoustics Avidea Скачать руководство пользователя страница 11

Connecting a Forward-Mount Game or Camcorder

The set of inputs mounted on the right side of the Control Center allow you to connect and 

disconnect components without having to move the Control Center to access the rear panel.

Devices that may be connected on a temporary basis include camcorders and video games.

These devices usually include special cables that supply audio and video outputs. You may want 

to refer to your camcorder or video game manual for more information on connecting them to

other components.

Connecting Headphones

The headphone jack is located on the right side of the Avidea Control Center. Inserting 

a headphone jack will mute all the Avidea system’s speakers.

x

Note : The headphone jack is 1/8 inch (3.5mm), standard for most headphones. An optional adapter 

(not included) will enable you to connect other size plugs, and is available at your Boston Acoustics dealer.

.

.

.

.

.

.

23

Connecting a CD Changer

Connect the Audio Outputs from your CD Changer to the 

Changer Audio

Inputs on the rear

panel of the Control Center. Some CD Changers have digital as well as analog outputs. You may

choose to use either one.

Connecting a DVD Changer

Connect the Digital Audio Output from your DVD Changer to the 

Changer Audio

Input on the

rear panel of the Control Center. Connect the Video Out on your DVD Changer to the 

Changer

Video

Input. If your DVD Changer is progressive scan, connect its Component Video Outputs to

Component Video In

, unless it is already being used by your HD Cable Box, Satellite Receiver,

or Terrestrial Receiver. If that is the case, use S-Video instead.

x

Note : The library of Device codes associated with the Changer are for CD players and CD Recorders. Any given

brand of DVD player or recorder may use the same codes. If that is not the case for your Device, then you may use

Learning Mode to teach all the appropriate commands from the original Remote Control to the Avidea Remote

Control. You may also choose to use FreedomEdit and your PC to change the Device associated with the Changer

input. (See the FreedomEdit CD-ROM that came with your Avidea Remote Control.)

. . .
. . .

INST

ALLA

TION

22

INST

ALLA

TION

INSTALLATION

02

SECTION

02

SECTION

INSTALLATION

 

Содержание Avidea

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды