Connecting Audio from a TV Using an Antenna or Cable Without a Cable Box
If you are using the Tuner in your TV to watch cable or regular off-air programming, you will need
to supply the audio signal to the Avidea system. Connect your TV’s Audio Out to the
TV (From
TV) Audio
on the rear panel of the Control Center. You may wish to permanently shut off the TV’s
internal speakers and set the TV’s audio output to “fixed” if that option is available. Please consult
your TV owner’s manual.
x
Notes : The Avidea Remote Control must be programmed to operate your TV. (See ‘Entering Codes for Other Devices’
on page 21 of the Avidea Remote Control Setup and Use Guide.)
This configuration will not allow use of the Avidea Status Bar or Setup Menu while watching TV.
: Connecting Other Audio or Audio/Video Devices
Connecting a VCR or PVR (Personal Video Recorder)
Connect the Audio and Video Outputs on your VCR or PVR to the
VCR/PVR Audio In
and
Video
In
on the rear panel of the Control Center. Connect the Audio and Video Inputs on your VCR or
PVR to the
VCR/PVR Audio Out
and
Video Out
on the rear panel of the Control Center. Owners
of certain PVRs used in conjunction with a satellite receiver or digital cable box may want to
connect the two Devices directly to each other for recording. Please consult your PVR owner’s
manual for details.
You must set the Avidea Control Center to Stereo or 5 speaker mode when recording to a VCR or
PVR from other Devices connected to the Avidea system. (See ‘Listening Modes’ on page 36.) To
record from any Device to a VCR or PVR, that Device must be connected by an analog audio cable.
Connecting a Cassette Deck
Connect the Audio Outputs (Play) on your Cassette Deck to the
Aux Audio In
on the rear panel
of the Control Center. Connect the Audio Inputs (Rec) on your Cassette Deck to the
Aux Audio
Out
on the rear panel of the Control Center.
You must set the Avidea Control Center to Stereo or 5 speaker mode when recording to a Cassette
Deck from other Devices connected to the Avidea system. (See ‘Listening Modes’ on page 36.) To
record from any Device to a Cassette Deck, that Device must be connected by an analog audio cable.
Connecting a MiniDisc or CD Recorder
MiniDisc (MD) and CD Recorders offer digital connections. Use the appropriate connectors
(not supplied) to connect the Audio Outputs (Play) from your MiniDisc or CD recorder to the
Aux Audio In
on the rear panel of the Control Center. Connect the Audio Inputs (Rec) from
your MiniDisc or CD recorder to the
Aux Audio Out
on the rear panel of the Control Center.
You must set the Avidea Control Center to Stereo or 5 speaker mode when recording to an MD/CD
Recorder from other Devices connected to the Avidea system. (See ‘Listening Modes’ on page 36.)
To record from any Device to an MD/CD Recorder, that Device must be connected by a digital
audio cable (not supplied). If a digital output is not available for a Device from which you wish to
record, then use an analog audio cable and connect your MD/CD recorder with an analog cable in
addition to a digital cable. Consult your MD/CD Recorder owner’s manual to record from an analog
signal.
21
.
.
.
.
.
.
. . .
. . .
INST
ALLA
TION
20
Audio
Video
Video
Video In
Out
Audio Out
Digital
Analog
+12V
Y
Y
IR 1
In
Antenna
IR 2
Ch
ID
Prog.
Int.
Connect To Subwoofer
Pr
Pr
Pb
Pb
S
Composite
Composite
Component
S
L
R
L
R
TV (From TV)
Component RF
Audio Out
Remote
Monitor Out (To TV)
Zone 2 Trigger
UL
7H57
®
WA R N I N G
AV I S
770
DVD Control Center
Rating : AC 120V 80Hz 50W
Boston Acoustics, Inc.
Peabldy, MA USA
Designed in USA / Made in China
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
C
US
LISTED
AUDIO/VIDEO
EQUIPMENT
E206909
RISK OF ELECTRIC SHOCK
DO NOT OPEN
INST
ALLA
TION
INSTALLATION
02
SECTION
02
SECTION
INSTALLATION
