background image

This symbol found on the apparatus indicates hazards arising from dangerous voltages.

This symbol found on the apparatus indicates the user should read all safety statements

found in the user manual.

WARNING!

To reduce the risk of fire or electric shock, do not expose the apparatus to

rain or moisture.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings.

Install in accordance with the 

manufacturer’s instructions.

Do not install near any heat sources

such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that

produce heat.

Do not defeat the safety purpose of 

the polarized or grounding-type plug.

A polarized plug has two blades with one

wider than the other. A grounding type plug

has two blades and a third grounding prong.

The wide blade or the third prong are provided

for your safety. If the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being

walked on or pinched – particularly at

plugs, convenience receptacles, and the point

where they exit from the apparatus.

Only use attachments/accessories 

specified by the manufacturer.

Unplug this apparatus during lightning

storms or when unused for long periods

of time.

Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any way,

such as if the power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Maintain a minimum distance of 2 inches

(50mm) around the front, rear, and sides

of the apparatus for sufficient ventilation. The

ventilation should not be impeded by covering

the ventilation openings or placing on or

around the apparatus items such as newspapers,

tablecloths, curtains, etc.

No naked flame sources, such as 

lighted candles, should be placed on

the apparatus.

The apparatus should not be exposed

to dripping or splashing. No objects

filled with liquids, such as vases, should be

placed on the apparatus.

The apparatus is suitable for use in

tropical and/or moderate climates.

LASER BEAM: Do not look into the

opening of the disc slot or ventilation

opening of the product to see the source of

the laser beam. It may cause sight damage.

DISC: Do not use a cracked, deformed,

or repaired disc. These discs are easily

broken and may cause serious personal injury

and product malfunction.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the

CATV system installer’s attention to Article

820.40 of the NEC that provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to

the grounding system of the building, as close

to the point of cable entry as practical.

.

.

.

.

.

.

SAFETY INSTRUC

TIONS

3

IMPORTANT SAFETY INSTRUCTIONS

00

SECTION

SETUP AND USE 

GUIDE

SETUP AND USE 

GUIDE

AVIDEA SYSTEM

SETUP AND USE

GUIDE

Содержание Avidea

































Отзывы: