Boss Dr. Rhythm DR-880 страница 72 Скачать руководство пользователя

Страница: 72 / 168

Using Groove Modify

To execute with the specified settings,
press [ENTER]. To cancel, press [EXIT].

If you want to save the pattern, proceed
to “Saving a pattern” (p. 65).

Adding ghost notes

By adding “ghost notes” to the pattern you can
create a realistic sense of groove, just as in an
actual drum performance.

Select a pattern (p. 50).

Press [GROOVE].

The groove modify menu screen appears.

fig.02-110d

Move the cursor to the “GHOST NOTE”
icon and press [ENTER].

The ghost note setting screen appears.

fig.02-140d

Move the cursor to the relevant item, then
use the VALUE dial to set the value.

To execute with the specified settings,
press [ENTER]. To cancel, press [EXIT].

If you want to save the pattern, proceed
to “Saving a pattern” (p. 65).

0–150%

Adjust the volume of the bass

A setting of 0% will make the sound extremely faint.
With a setting of 100%, the velocity will be as specified
in the pattern.
Settings of 101% or higher will make the velocity higher
than specified in the pattern.

Parameter/

Range

Explanation

Parameter/

Range

Explanation

On/Off

OFF, ON

Turn Ghost Note on/off

* You can also press [GROOVE] to turn this on/off.

Template

see below

Number of the template that you
want to use

STRAIGHT 1–20:

These are appropriate for straight patterns.

SHUFFLE 1–20:

These are appropriate for shuffle patterns.

Depth

0–100

Volume of the ghost notes

Содержание Dr. Rhythm DR-880









































































































































































Результаты поиска

Содержание Dr. Rhythm DR-880

Отзывы:

Похожие инструкции для Dr. Rhythm DR-880

Бренды по названию

Популярные бренды

Boss Dr. Rhythm DR-880, Руководство пользователя

Результаты поиска

Содержание Dr. Rhythm DR-880

Отзывы:

Похожие инструкции для Dr. Rhythm DR-880

Бренды по названию

Популярные бренды