Maintenance
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
CAUTION
If you leave the key in the switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the switch before you perform any maintenance.
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
Before each use or daily
• Check the ratchet straps and tighten as necessary.
• Check the pintle-chain conveyor tension.
• Empty the cleanout tray.
Every 20 hours
• Grease the bearings.
• Grease the pintle chain (Model VBS14210B, VBS15310B, and VBS15160B only).
• Tighten the hardware.
Before storage
• Unload the spreader.
• Clean and grease all of the bearings.
• Clean and grease the pintle-chain (Model VBS14210B and VBS15310B only).
Lubrication
Greasing the Machine
Every 20 hours—Grease the bearings.
Every 20 hours—Grease the pintle chain (Model
VBS14210B, VBS15310B, and VBS15160B
only).
Grease all of the bearings, and pintle chain for model
VBS14210B, VBS15310B, and VBS15160B, with a
general-purpose, lithium-based grease.
Miscellaneous
Maintenance
Adjusting the Pintle-Chain
Conveyor Tension
Pintle-Chain Models Only
Service Interval:
Before each use or daily—Check
the pintle-chain conveyor tension.
1.
Disconnect the power/ground cable and main
harness from the wire harness.
2.
Remove the back cover shown in
.
20
Содержание VBX 6500
Страница 31: ...Notes ...
Страница 32: ......