Boss Snowplow VBX 6500, Руководство пользователя

Страница: 19 / 32

Installing the Pintle-Chain
Restrictor Plate (Optional)
Pintle-Chain Models Only
If the spreader flow is too fast, install the restrictor
plate. If the spreader flow is too slow, remove the
restrictor plate.
1. Unplug the power/ground cable and the main
harness from the wire harness.
2. Remove the spinner assembly; refer to
Removing the Spinner Assembly (page 18) .
3. Remove the plastic clips securing the front cover
to the hopper (
Figure 22 ).
g029502
Figure 22
1. Plastic clip 2. Front cover
4. Carefully pull the cover away and unplug the
cover harness from the main wire harness.
5. Set the cover aside.
6. Insert the restrictor plate and secure it with 2
bolts and locknuts (
Figure 23 ).
g266857
Figure 23
1. Restrictor plate
7. Position the front cover in place and connect the
cover harness to the main wire harness.
8. Secure the front cover to the hopper using the
previously removed plastic clips.
9. Connect the power/ground cable and main
harness to the wire harness.
Operating Tips
•
Know the area in which you are working; hidden
obstructions such as curbs, sidewalks, and pipes
can damage the spreader or vehicle.
•
Do not let the ice build up; always start as soon
as possible.
•
Always wear your seatbelt when spreading.
•
Always remember to spread at a safe speed.
•
Never ride on or put body parts into the spreader
while servicing or operating it.
19