Boss Snowplow VBX 6500, Руководство пользователя

Страница: 14 / 32

Work-Light Switch
The work-light switch activates the rear lights.
Control Module
The control module is located under the front cover.
The LED on the module can be used to help with
Troubleshooting (page 25) .
g266146
Figure 14
1. Control module
Spreader Controller
The spreader controller shows information about your
machine.
Figure 15 and Figure 16 illustrate the main
screen and adjustment screen of the controller. You
can switch between the main screen and adjustment
screen at any time by pressing the Mode button.
Refer to Controller Status and Error Indicators (page
22) for additional controller icons.
Main Screen
g029495
Figure 15
1. Feed speed dial 5. Vibrate button
2. Start/Stop button 6. Blast button
3. Mode button 7. Light button
4. Spinner Speed dial
•
Feed Speed dial—increases the feed motor speed
when turned clockwise, and decreases the feed
motor speed when turned counterclockwise. The
feed speed determines how quickly material is
pulled from the hopper.
•
Feeder display—indicates the feed motor speed
•
Start/Stop button—turns the feeder, spinner, and
vibrator (if active) motors on or off
•
Unit type display—indicates if the control module
is set for auger or pintle chain mode
•
Mode button—switches between the main screen
and the adjustment screen
•
Spinner display—indicates the spinner motor
speed
•
Spinner Speed dial—increases the spinner
motor speed when turned clockwise, and
decreases the spinner motor speed when turned
counterclockwise. The spinner speed determines
how far the material is thrown.
•
Light button—turns the rear lights on or off
•
Blast button—momentarily sends full power to
the feed and spinner motors in 2 second bursts.
Holding the button increases the motors to full
speed for 2 seconds and then pauses for 2
seconds then repeats until you release the button.
The Blast button only works if the feed and spinner
motors are set at less than maximum speed.
•
Vibrate button—switches the vibrator on or off
Note:
The vibrator only runs when the feeder
motor is on.
14