Boss Snowplow Drag Pro 180Z, Руководство пользователя

Страница: 24 / 32

5. Allow the fluid to fully drain, then replace the
plug. Torque the plug to 17 to 28 N∙m (150 to
250 in-lb).
Adding Hydraulic Fluid
Capacity: The reservoir holds approximately 1.9 L (2
US qt) of hydraulic fluid.
1. Clean the area around the fill cap ( Figure 47 ).
g332354
Figure 47
2. Remove the fill cap from the hydraulic reservoir
(
Figure 47 ).
3. Slowly fill the reservoir with BOSS
high-performance hydraulic fluid until the
fluid covers the pump inside the reservoir.
4. Install the previously removed fill cap.
5. Start the vehicle and operate the plow in its full
range of movement.
6. Stop the vehicle, check the hydraulic-fluid level,
and replenish the fluid if necessary.
Adjusting the Hydraulic Lowering
Speed
WARNING
Adjusting the flow-control valve can cause
the plow to drop suddenly, resulting in bodily
harm.
• Ensure that all observers are standing a
safe distance from the plow.
• Ensure that the controller is off before
adjusting the plow.
• Keep your body away from the plow blade.
Turn the valve clockwise to decrease the lowering
speed.
Turn the valve counterclockwise to increase the
lowering speed.
g333859
Figure 48
Checking the Hydraulic Lines and
Hoses
WARNING
Hydraulic fluid escaping under pressure can
penetrate the skin and cause injury.
• Ensure that all hydraulic-fluid hoses
and lines are in good condition and all
hydraulic connections and fittings are tight
before applying pressure to the hydraulic
system.
• Keep your body and hands away from
pinhole leaks or nozzles that eject
high-pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic
leaks.
• Safely relieve all pressure in the hydraulic
system before performing any work on the
hydraulic system.
• Get immediate medical help if fluid is
injected into skin.
Check the hydraulic lines and hoses daily for
leaks, kinked lines, loose mounting supports, wear,
loose fittings, weather deterioration, and chemical
deterioration. Make all necessary repairs before
operating.
24