Boss Snowplow Drag Pro 180Z, Руководство пользователя

Страница: 5 / 32

decalmsc18131b
MSC18131
1. Crushing hazard—keep hands away.
decalmsc24730
MSC24730
1. Warning—read the
Owner’s Manual .
6. Crushing hazard—do
not stand between the
plow and vehicle during
maintenance.
2. Warning—all operators
should be trained before
operating the machine. 7. Warning—do not exceed
64 km/h (40 mph) when
transporting the plow.
3. Warning—attachment pins
must be secured before
plowing. 8. Warning—do not exceed
23 km/h (14 mph) when
plowing.
4. Warning—attachment
pins must be released to
remove the plow. 9. Warning—lower the plow
when the vehicle is not in
use.
5. Warning—do not transport
the plow with the blade
wings extended.
decalmsc24731
MSC24731
1. Attention—read the
Owner’s Manual before
attaching the plow.
6. Retract the plow wings.
2. Turn on the plow controller,
and slowly back up toward
the plow. Ensure the
controller is not in FLOAT
mode. 7. Release the attachment
pins and raise the coupler
assembly out of the
receiver.
3. Connect the ground/power
and plow wire harnesses
and lower the coupler
assembly into the receiver. 8. Disconnect the
ground/power and plow
wire harnesses, and slowly
drive forward.
4. Secure the attachment
pins. 9. Turn off the plow controller.
5. Attention—read the
Owner’s Manual before
removing the plow.
decalmsc24732
MSC24732
1. Attention—read the
Owner’s Manual .
3. Press the switch down
to lower the coupler
assembly.
2. Press the switch up
to raise the coupler
assembly.
5