Boss Snowplow Drag Pro 180Z, Руководство пользователя

Страница: 7 / 32

3. Loosely attach the coupler assembly to the link
arm assemblies using 2 bolts (3/4 x 4 inches)
and locknuts (3/4 inch).
g332356
Figure 7
4. Loosely attach the top links to the upper brackets
on the center blade using 2 bolts (3/4 x 4 inches)
and 2 locknuts (3/4 inch).
g332357
Figure 8
5. Loosely attach the top links to the upper brackets
on the coupler assembly using 2 bolts (3/4 x 4
inches) and 2 locknuts (3/4 inch).
Installing the Hydraulic
Cylinders
1. Loosely attach the rod end of the lift cylinder to
the center bracket on the center blade using 2
bolts (5/8 x 4-1/2 inches) and 2 locknuts (5/8
inch).
g332350
Figure 9
2. Loosely attach the body end side of the lift
cylinder to the coupler assembly using 2 bolt
(5/8 x 4-1/2 inches) and 2 locknuts (5/8 inch) as
shown in
Figure 9 .
3. Loosely attach the body end side of the 2 wing
hydraulic cylinders to the center blade using 1
bolt (3/4 x 4-1/2 inches) and 1 locknut (3/4 inch)
as shown in
Figure 10 .
g332359
Figure 10
4. Loosely attach the rod end side of the wing
cylinders to the wing assembly using 3 bolts (3/4
x 5-1/2 inches), 1 bolt (3/4 x 4-1/2 inches), 6
washers, 4 locknuts, 2 cam links, 2 arm links,
and 1 spacer as shown in
Figure 11 .
7