•
Always lower the blade when the vehicle is not in
use.
•
Never put any part of your body between the plow
and the vehicle.
•
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
•
Always wear your seat belt while operating a motor
vehicle.
•
Due to the variety of equipment that you
can install on the vehicle, do not exceed the
front gross-axle-weight rating (FGAWR), rear
gross-axle-weight rating (RGAWR), and the
gross-vehicle-weight rating (GVWR) at any time.
This may require weighing the vehicle and adding
ballast as necessary. It may also limit the payload
capacity of the vehicle.
•
This machine has an operating sound level below
70 dBA.
•
When transporting the machine, ensure that it is
properly secured. Instructions are available at
www.BOSSPlow.com
.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
decalmsc04603-5
MSC04603-5
1.
Read the
Owner’s
Manual
for information
on removing the plow.
4.
Read the
Owner’s
Manual
for information
on attaching the plow.
2.
Rotate the release lever
clockwise and pull out the
spring pin handle to unlock
the coupler; do not leave
the spring pin pushed in.
5.
Rotate the release lever
counterclockwise and
push in the spring pin
handle to lock the coupler;
do not leave the spring pin
pulled out.
3.
Coupler spring pin unlock
6.
Coupler spring pin lock
decalmsc04604-5
MSC04604-5
1.
Read the
Owner’s
Manual
for information
on attaching the plow.
4.
Read the
Owner’s
Manual
for information
on removing the plow.
2.
Rotate the release lever
clockwise and push in the
spring pin handle to lock
the coupler; do not leave
the spring pin pulled out.
5.
Rotate the release lever
counterclockwise and pull
out the spring pin handle
to unlock the coupler; do
not leave the spring pin
pushed in.
3.
Coupler spring pin lock
6.
Coupler spring pin unlock
4
Содержание Drag Pro 180Z
Страница 10: ...g337916 Figure 18 g332802 Figure 19 g337915 Figure 20 Overview 10...
Страница 30: ...g349525 Rev A 30...
Страница 31: ...Notes...
Страница 32: ......
