48
April 12, 2001
PDF259774_00
Using the Wave/PC
™
Unit Controls
Clock display mode
Figure 41 shows you the display indicators of the clock display. To view the AM/FM station
frequency while in the clock mode, press both
Tuning
buttons at the same time.
Figure 41
The clock display
AM/FM tuner display mode
Figure 42 shows you the display indicators of the AM/FM tuner display.
Figure 42
The AM/FM tuner display
Selecting AM/PM (12 hour) or Military (24 hour) time
1.
Press the
On/Off
button once to turn the Wave/PC system off.
2.
Press and hold
Clock Set
, and then press
On/Off
to switch between AM/PM (12 HR)
or military (24 HR) formats
Adjusting the display brightness
In low light situations, the display dims automatically. To adjust the brightness level for auto-
matic dimming:
1.
Press and hold the
Clock Set
button.
2.
Press
Volume
up to view the 10 levels of increasing brightness. Use the
Volume
up or
down button to select your preferred setting.
3.
Release the
Clock Set
button.
In the event of a power outage, the selected setting is retained by the radio with the
9V battery backup power.
SLEEP
PM
ALARM
ALARM 2
AM
Indicates ALARM is set
for AM/FM station alarm
Shows current time, wakeup time, sleep time,
station frequency, or volume setting
Indicates ALARM
is selected
Indicates ALARM is
set for tone alarm
Indicates ALARM 2 is
set for tone alarm
Indicates ALARM 2
is selected
Indicates ALARM 2 is set
for AM/FM station alarm
Indicates AM or PM
Indicates sleep mode
AUX FM
STEREO
VOL AM
SEEK
PRESET
1
2
3
4
5
6
Indicates the selected
sound source
Shows station frequency, current time,
wakeup time, sleep time, or volume setting
Indicates FM
stereo broadcast
Indicates volume
setting is displayed
Indicates the unit is
searching for the
next strong station
Indicates a preset
station is set
Indicates the selected
preset station