Bosch WORCESTER Sense II, Руководство по установке

Страница: 17 / 64

17
Basic principles of operation
Sense II – 6 720 818 367 (2015/10)
4.2 Overview of the symbols in the display
Fig. 16 Example for a standard display of a system with more than one heating circuit

Fig. 16, page 17
Item Symbol Designation Explanation
1 Value display Display of current temperature:
•
Room temperature for wall-mounted installation
• Heat source flow temperature for installation in heat source.
2 – Information line Display of time of day, day of the week and date.
3 Additional
temperature
display Display of an additional temperature: outside temperature, temperature of the
solar collector or a DHW system (for further information

operating instructions
of the controller).
4 – Text information E.g. the designation of the temperature currently displayed (

Fig. 16, [1]); a
designation for the room temperature is not displayed. If a fault is present,
corresponding information will be displayed here until the fault has been
rectified.
5 Information
graphic Solar circuit pump is in operation.
DHW heating is active
DHW heating is switched off
Burner is on (flame)
B External cut off switch is activated (NOT USED), or connector with link (supplied)
is not installed within the heat source (

Fig. 12, page 12)
6 Time &
temperature
program Graphical display of the active time program for the heating circuit displayed. The
height of the bars represents roughly the desired room temperature in the
different time slots.
7 Time marker The time marker

indicates the current time of day in the time program in
15 minute increments.
Table 8 Symbols on the standard display
6
1
3
8
2
9
4
5
7