Bosch VIP-X1XF, Инструкция по установке и эксплуатации

Страница: 89 / 132

VIP X1 XF Configuration using a Web browser | en 89
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.54 | 2011.09
Port
Assign a different port to each data stream if there are simultaneous data streams at the same
multicast address.
Enter the port address of the required stream here.
Streaming
Click the checkbox to activate multicast streaming mode for the relevant stream. An enabled
stream is indicated by a check mark. The device even streams multicast data if there is no
active connection.
Streaming is typically not required for standard multicast operation.
Multicast packet TTL
You can enter a value to specify how long the multicast data packets are active on the
network. This value must be greater than one if multicast is to be run via a router.
5.41 Advanced Mode: FTP Posting
You can save individual JPEG images on an FTP server at specific intervals. You can then
retrieve these images at a later date to reconstruct alarm events if required. The resolution
corresponds to the highest setting from the two data streams.
Furthermore, you can export selected recordings manually from the RECORDINGS page or
activate the automatic export of alarm recordings on the Recording Profiles settings page.
File name
You can select how file names will be created for the individual images that are transmitted.
– Overwrite
The same file name is always used and any existing file will be overwritten with the
current file.
NOTICE!
Duplication of data places a heavy demand on the unit and can lead to impairment of the
image quality under certain circumstances.