Bosch VIP-X1XF, Инструкция по установке и эксплуатации

Страница: 33 / 132

VIP X1 XF Configuration using a Web browser | en 33
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.54 | 2011.09
5.10 Advanced Mode: Identification
Device ID
Each VIP X1 XF should be assigned a unique identifier that you can enter here as an additional
means of identification.
Device name
You can give the VIP X1 XF a name to make it easier to identify. The name makes the task of
administering multiple units in larger video monitoring systems easier, for example using the
Bosch Video Client or Bosch Video Management System programs.
The device name is used for the remote identification of a unit, in the event of an alarm for
example. For this reason, enter a name that makes it as easy as possible to quickly identify the
location.
Camera 1
The camera name makes it easier to identify the remote camera location, in the event of an
alarm for example. It will be displayed in the video screen if configured to do so (see
Section Camera name stamping, page 38 ). The camera name makes the task of administering
cameras in larger video monitoring systems easier, for example using the Bosch Video Client
or Bosch Video Management System programs.
Enter a unique, unambiguous name for the camera in this field. You can use both lines for this.
You can use the second line for entering additional characters; these can be selected from a
table.
1. Click the icon next to the second line. A new window with the character map is opened.
2. Click the required character. The character is inserted into the Result field.
3. In the character map, click the << and >> icons to move between the different pages of
the table, or select a page from the list field.
4. Click the < icon to the right of the Result field to delete the last character, or click the X
icon to delete all characters.
CAUTION!
Do not use any special characters, for example & , in the name.
Special characters are not supported by the system's internal management.
CAUTION!
Do not use any special characters, for example & , in the name.
Special characters are not supported by the system's internal management.