Bosch VIP-X1XF, Инструкция по установке и эксплуатации

Страница: 100 / 132

100 en | Operation VIP X1 XF
DOC | V4.54 | 2011.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH
System Log / Event Log
The System Log field contains information about the operating status of the VIP X1 XF and the
connection. You can save these messages automatically in a file (see Section 5.15 Advanced
Mode: LIVEPAGE Functions, page 41 ).
Events such as the triggering or end of alarms are shown in the Event Log field. You can save
these messages automatically in a file (see Section 5.15 Advanced Mode: LIVEPAGE Functions,
page 41 ).
1. If you want to delete the entries, click the delete icon in the top right-hand corner of the
relevant field.
2. If you want to view a detailed log, click the icon in the top right-hand corner of the
relevant field. A new window will open.
Audio function
Depending on the configuration, the VIP X1 XF can send and receive audio signals. All users
who are connected by browsers receive the audio signals sent by the VIP X1 XF.
Audio signals can only be sent to the VIP X1 XF by the user who connects to the unit first.
1. On the LIVEPAGE , click anywhere next to the video image to remove the focus from the
ActiveX.
2. Hold down the F12 key to establish a voice connection with the VIP X1 XF. The browser's
status bar displays the message Send Audio ON .
3. Release the F12 key when you want to stop sending audio signals to the VIP X1 XF. The
status bar in Internet Explorer displays the message Send Audio OFF .
NOTICE!
When the connection maintaining voice contact with the VIP X1 XF is broken, the next user to
make a connection to the VIP X1 XF can send audio data to the VIP X1 XF.