Bosch VIP-X1XF Скачать руководство пользователя страница 20

Страница: 20 / 132

en | Installation

VIP X1 XF

DOC | V4.54 | 2011.09

Installation and Operating Manual

Bosch Sicherheitssysteme GmbH

4.4

Power on/Power off

Power supply

The VIP X1 XF does not have a power switch. Power is supplied via a separate unit. Connect

the VIP X1 XF to the power supply unit and plug this into the mains. The unit is now ready for

use. The VIP X1 XF does not come supplied with a power supply unit.

Standard version: plug the terminal block with the PSU cable connected to it into the

orange socket on the VIP X1 XF.

Eco-version: connect the power supply unit to the

12V DC

socket on the VIP X1 XF. The

jack must fit a pin of 2 mm (0.079 in) in diameter (polarity:

Connect the power supply unit to the mains. The VIP X1 XF is ready for use as soon as the

POWER

LED changes from a red light, indicating the start-up procedure, to a green light.

Provided the network connection has been correctly made, the green LED (standard version:

ETH

; Eco-version:

LINK

) also lights up. The lit orange LED (standard version: ETH; Eco-version:

ACT

) signals that data packets are being transmitted via the network.

4.5

Setup using Bosch Video Client

The

Bosch Video Client

program can be found on the product CD supplied. This program

allows you to implement and set up the encoder in the network quickly and conveniently.

Installing the program

Insert the product disc into the optical drive of the PC;

–

The installation program should start automatically.

If installation does not start automatically, locate the

BVC_installer.exe

file on the disk

and double-click it.

Follow the instructions on the screen to complete the installation.

CAUTION!

Use only power supply units with UL approval and a power output according to LPS or

NEC Class 2.

Where necessary, use suitable equipment to ensure that the power supply is free from

interference such as voltage surges, spikes or voltage drops.

Do not connect the VIP X1 XF to the power supply until all other connections have been made.

NOTICE!

Using Bosch Video Client to set all parameters in the VIP X1 XF is an alternative to

configuration by means of a Web browser, as described in chapter 5 of this manual.

Содержание VIP-X1XF





































































































































Результаты поиска

Содержание VIP-X1XF

Отзывы:

Похожие инструкции для VIP-X1XF

Бренды по названию

Популярные бренды

Bosch VIP-X1XF, Инструкция по установке и эксплуатации

Результаты поиска

Содержание VIP-X1XF

Отзывы:

Похожие инструкции для VIP-X1XF

Бренды по названию

Популярные бренды