Bosch Rexroth WS290, Руководство по эксплуатации

Страница: 61 / 104

Hydraulics training system WS290 | RE 00225-B/12.15 Bosch Rexroth AG 61/104
Transport and storage
8.3 Storage
Table 8:
Storage conditions
Denomination Unit Value
Installation surface of the WS290 training system See chapter 4
Condition of the installation surface Even
Min. storage temperature °C +5
Max. storage temperature °C +30
Relative air humidity % 25-70
Max. installation height m 1000 above sea level
Requirements for storing the training system:

Remove any attachments and device sets not required beforehand.

Do not exceed the max. admissible load-bearing capacity of the rollers
(max. 450 kg total weight).

Tighten the transport lock at the load simulator.

Ensure before transportation that no mineral oil can leak; drain the tank,
if necessary.

Transportation to the other building has to be effected according to
chapter 8.2.2.
You should store the WS290 training system as follows:

Loosen the locking device of the guide rollers.

Roll the WS290 training system to the storage location:

Lock the locking devices of the guide rollers against rolling away.

Protect the WS290 training system from dust and humidity.
The WS290 training system may now be stored.