Bosch Rexroth WS290, Руководство по эксплуатации

Страница: 13 / 104

Hydraulics training system WS290 | RE 00225-B/12.15 Bosch Rexroth AG 13/104
Safety instructions
WARNING
Leaking hydraulic fluid due to leakage of the drive module or incomplete or
faulty components of the hydraulic system!
Risk of burning! Risk of injury! Risk of fire!

Switch the system off immediately (EMERGENCY OFF switch).

Identify and remedy the cause of the leakage.

Never try to stop or seal the leakage or the oil jet using a cloth.

Never come into contact with the splashing high-pressure oil jet.

Carry out visual inspections for leak-tightness of the drive module and the
oil-containing components on a regular basis and make sure that hose
lines/hose couplings are correctly connected.

Wash your hands after contact with hydraulic oil.
Danger due to parts flying around due to excessive pressure in the
hydraulic system!
Risk of serious injury!

Before decoupling the hoses, always depressurize the hydraulic circuit.

Look out for damaged, uncoupled hose lines.

Look out for loose, unfastened set-ups.

Do not work without safety goggles; there is the risk of eye injuries.
Slip hazard due to oily surfaces!
Risk of injury!

Protect and mark the danger zone.

Use an oil binding agent in order to bind the leaked hydraulic oil.

Provide binding material already before filling, refilling or changing
hydraulic oil.

Remove and dispose of the contaminated oil binding agent.

Wear your protective equipment, such as safety shoes.
Hot surfaces at the drive module!
Risk of injury! Risk of burning!

Only touch the surfaces of the drive module with protective gloves or do not
work at hot surfaces. During or after the operation, the temperatures of the
components and the oil may rise to values higher than 50 °C, depending on
the operating conditions.

Allow the drive module to cool down sufficiently before touching it.

Observe the protective measures of the end machine manufacturer.
Danger of crushing due to pressurized movable elements!
Risk of injury!

Correctly mount the required protective cover e.g. at the load simulator.

Under no circumstances, remove any safety instructions and signs and/or
make sure that they are mounted.