s
3
s
S
1
2
S
①
Mount the first rotor (transfer "S" mark to machine)
②
Mount the second rotor (align "S" mark according to "S" posi‐
tion of first rotor)
③
Correct assembly = aligned pole rows of the magnets
Fig. 12-11:
Mounting the rotor with parallel motor arrangement
Parallel arrangement -stator as‐
sembly
During stator assembly, both stators have to be aligned in the axis construc‐
tion (as the two rotors), For stators with radial cable output that should be
used for parallel alignment, the cable output position is the mark for the align‐
ment (see
and
.
Parallel arrangement - power ca‐
ble connection (cable outlet in the
same direction)
If the stator is mounted with cable outlet in the same direction, the connection
wires of the stators must be applied according to the instructions in chapter
"Connection technology" or in
326/409
Installation
MBT High Synchronous Torque Motors
Bosch Rexroth AG R911298798_Edition 08
Содержание rexroth MBT
