Bosch Rexroth lndraControl VPB 40.1, Руководство по планированию проекта

Страница: 69 / 84

● Red LED: Fan stands still, or fan speed is too low or too high.
● Green LED: Fan is working properly.
Clicking on the StopAutoRefresh button, disables the automatic update of the
measured values and the labeling on the button changes to AutoRefresh.
Clicking on the AutoRefresh button, enables the automatic update of the meas‐
ured values and the labeling on the button changes to StopAutoRefresh.
Profibus and further settings The ProfiBus/Mode COM3 tab consists of the following both segments:
●
Profibus Adr.: Select the PROFIBUS address
● Select COM3 Connection: Selection, if the COM3 interface is provided as
serial interface at the XCOM3 connector or is internally connected with the
keyboard controller.
Fig.9-7: Profi Bus / Mode COM3 tab
Select COM3 connection
XCOM3 COM3 is accessible at connection XCOM3
Keyboard Controller COM3 is internally connected with the keyboard controller to
●
request the state of the M-keys via the serial interface
(see section "M-keys" in chapter 6 "Display and Oper‐
ating Components" on page 29 ) or
● reload firmware into the keyboard controller
Fig.9-8: Select COM3 connection
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC Bosch Rexroth AG 67/81
Software