Bosch Rexroth lndraControl VPB 40.1 Скачать руководство пользователя страница 49

Страница: 49 / 84

Maintenance and Installation

8.1

General Information

The VPB 40.1 are maintenance-free. However, some components are subject

to wear and must be replaced.

Maintenance

Include the following measures in the maintenance schedule:
●

At least once a year, check all plug and terminal connections of the com‐

ponents regarding proper tightness and possible damage. Check that

cables are not broken or crushed. Replace damaged parts immediately.

●

Check the fan at least once a year.

Risk of injury by rotating fan impeller!

DANGER

The fan impeller must not to be touched with the hands and must not come into

contact with other objects.

●

Ensure that the batteries of the VPB 40.1 are fully functional. Activate the

battery test of the UPS program, so that the battery pack is checked during

each restart.

Function compatibility for spare parts is ensured for at least five

years.

8.2

Hard Disk

The hard disk frame can be accessed by a flap. The hard disk can be replaced,

also including the installation frame.

Data loss due to irregular or missing data back‐

up!

WARNING

Backup all required application data as well as operating system settings on an

external data carrier!

Damages on the VPB 40.1 due to electrostatic

discharges!

WARNING

Comply with all ESD protective measures while working with modules and

components! Avoid electrostatic discharges!

Loss of data and resinstallation of the operat‐

ing system and application programs after a

hard disk exchange due to a missing or irreg‐

ular backup.

NOTICE

Backup the hard disk regularly.

The hard disk to be inserted must already have an installed oper‐

ating system, if no floppy disk drive is connected to the VPB 40.1.

In any case, it is recommended to have a completely installed op‐

erating system on the hard disk, to shorten the installation time!

DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC

Bosch Rexroth AG

47/81

Maintenance and Installation

Содержание Rexroth lndraControl VPB 40.1





















































































Результаты поиска

Содержание Rexroth lndraControl VPB 40.1

Отзывы:

Похожие инструкции для Rexroth lndraControl VPB 40.1

Бренды по названию

Популярные бренды

Bosch Rexroth lndraControl VPB 40.1, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth lndraControl VPB 40.1

Отзывы:

Похожие инструкции для Rexroth lndraControl VPB 40.1

Бренды по названию

Популярные бренды