Bosch Rexroth lndraControl VPB 40.1, Руководство по планированию проекта

Страница: 31 / 84

6 Display and Operating Components
6.1 Monitor and Keyboard
Displays with foil keyboard and
touch screen
To display and operate the VPB 40.1 we recommend the displays VDP 16,
VDP 40 and VDP 60 especially designed by Bosch Rexroth for industrial ap‐
plications. The displays are connected with the VPB 40.1 via the G5 display
interface. These displays are equipped either with a keypad or with a touch
screen with varying display size.
For detailed information, please refer to the relevant documenta‐
tion.
Connection monitor
A standard monitor (female connector XVGA), a PS2 keyboard (female con‐
nector XKeyb.) and a PS2 mouse (female connector XMouse) can be also
connected with the VPB 40.1. Please observe that most of the standard mice
and keyboards are not suitable for the industrial environment and are very sus‐
ceptible to electromagnetic disturbances.
The VPB 40.1 control cabinet PC cannot be
operated if keyboard and mouse are connec‐
ted to the VPB 40.1 if a VDP display is used.
NOTICE
If a VDP is used, keyboard and mouse may only be connected to this display.
Don't use the keyboard and mouse interfaces at the VPB 40.1.
6.2 Operating and Error Display
In the lower right part of the connector panel there are five LEDs to display the
device states and errors. Apply the specified measure if one of the following
LEDs display either an error or a note.
LEDs for operating and error dis‐
play
LED Display Meaning Measure
Vi LED green Normal mode -
LED off No supply voltage AC 230 V/115 V
or DC 24 V
Check the supply voltage
at the power supply unit!
Vo LED green Normal mode -
LED off Internal 5 V supply faulty! -
T LED off Normal mode
LED flash‐
es yellow
Overtemperature Reduce surrounding air
temperature!
Check fan on the control
cabinet PC!
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC Bosch Rexroth AG 29/81
Display and Operating Components