Bosch Rexroth lndraControl VPB 40.1, Руководство по планированию проекта

Страница: 24 / 84

Standard Meaning
EN 60 529 Degrees of protection (including housings and installation
compartments)
EN 60 068-2-6 Vibration test
EN 60 068-2-27 Shock test
Fig.4-5: Used standards
4.6 CE Marking
4.6.1 Declaration of Conformity
The electronic products described in the project planning manual comply with
the requirements and goals of the following EC guideline and with the agreed
European standards:
EMC guideline 2004/108/EC
The electronic products described in the project planning manual comply with
the requirements on the operation within the industrial environment:
Standard Title Edition
DIN EN
61000-6-4
(VDE 0839-6-4)
Electromagnetic compatibility (EMC)
Volume: 6-4: Generic standards - emitted interfer‐
ence for industrial environments (IEC
61000-6-4:2006)
September
2007
DIN EN
61000-6-2
(VDE 0839-6-2)
Electromagnetic compatibility (EMC)
Volume: 6-2: Generic standards – noise immunity
for industrial environments (IEC 61000-6-2:2005)
March 2006
Fig.4-6: Electromagnetic compatibility (EMC) standards
4.6.2 Note for the Machine Manufacturer
The electronic products described in this project planning manual do not fall
under the machines listed in the EC guidelines. Therefore, explanations are not
required for the 89/392/EMC guideline and do not exist.
89/392/EMC, the EC guideline for machines, specifies the requirements on a
machine. In this guideline, a machine is defined as a combination of the com‐
ponents or mechanisms combined with each other. The described products
belong to the electrical equipment of a machine. Therefore, they are to be in‐
cluded in the declaration of conformity of the machine manufacturer.
The standard EN 60204-1 (safety of machinery, general requirements on the
electrical equipment of the machines) can be used for the electrical equipment
of the machines.
Loss of CE conformity due to modifications of
the device.
NOTICE
The CE marking is only valid for the device in its delivery status. After modifying
the device, the CE conformity is to be verified.
Bosch Rexroth AG DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
22/81
Technical Data