Bosch Rexroth lndraControl VPB 40.1, Руководство по планированию проекта

Страница: 41 / 84

PS/2 Mini DIN female connector, 6-pin
Interrupt (IRQ): 12
BIOS presetting: PS/2 mouse support: EnabledPS/2
Mouse: Auto detect
Fig.7-17: Mouse interface - PS/2 mouse
Mouse Clock
Mouse Data
Mouse
Power, +5VDC
1
2
3
4
5
6
GND
Shield
XPS2M S
Shield above the metallic housing
of the plug
max. 1.5 m
Fig.7-18: Mouse interface XMouse
If a PS/2 mouse is not recognized by the system, the mouse must be activated
in the BIOS by switching from "Disabled" to "Autodetect". The operating system
will not recognize the plugging-in of an external mouse after completed startup,
because the mouse is initialized during the booting process.
Entries with a connected mouse are only pos‐
sible if it is PS/2 compatible.
NOTICE
The connected mouse must comply with the PS/2 standard. Normally, the BIOS
reserves IRQ 12 for the PS/2 mouse If there are address conflicts, e. g., if IRQ
12 has already been used by another PC extension card, the IRQ of this ex‐
tension card should be changed to unassigned IRQ.
Entries with a connected mouse are only pos‐
sible if no other mouse is connected in parallel.
NOTICE
If a keyboard with an integrated mouse is connected to the XKeby interface, no
additional mouse must be connected to the mouse interface. The mouse inte‐
grated in the keyboard is available.
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC Bosch Rexroth AG 39/81
Connections