Bosch Rexroth IndraControl VEP 30.4 Скачать руководство пользователя страница 95

Страница: 95 / 142

Maintenance and Installation

8.1

General Information

The Embedded Terminal IndraControl VEP **.4s are maintenance-free. How‐

ever, some components are subject to wear and must be replaced.

Maintenance work in the device is only permissible by skilled staff!
If hardware or software components have to be exchanged, please

contact the Bosch Rexroth Service or ensure that only skilled staff

changes the respective components.

In order to avoid incorrect operation, clean the devices only when

they are switched off.

Maintenance

Include the following measures in the maintenance schedule:
●

Clean the screen at least once a week using an antistatic fabric or a

cleansing agent containing alcohol when the device is switched off. Avoid

hard objects that may cause scratches.

Dissolution of the foil surface as well as the

display seal by solvents or by high pressure

cleaning devices!

NOTICE

●

Do not use any solvents (e. g. diluents)!

●

Do not use compressed air, steam jet and high pressure cleaning devices!

●

At least once a year, check all plug and terminal connections of the com‐

ponents regarding proper tightness and possible damage. Check that

cables are not broken or crushed. Replace damaged parts immediately.

●

Check the fan at least once a year.

Risk of injury by rotating fan impeller!

DANGER

The fan impeller must not be touched by persons or come in contact with other

objects.

Function compatibility for spare parts is ensured for at least five

years.

8.2

LC Display

A fading backlight causes a progressive deterioration of the readability of the

LCD display, so that a backlight exchange is required. For further information

please contact the Bosch Rexroth Service.

8.3

CMOS Battery

The IndraControl VEP **.4 devices are provided with a lithium battery to buffer

the real-time clock in the BIOS. If this battery is empty or weak, the clock setting

is lost in the BIOS.

DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal

Bosch Rexroth AG

93/139

Maintenance and Installation

Содержание Rexroth IndraControl VEP 30.4















































































































































Результаты поиска

Содержание Rexroth IndraControl VEP 30.4

Отзывы:

Похожие инструкции для Rexroth IndraControl VEP 30.4

Бренды по названию

Популярные бренды

Bosch Rexroth IndraControl VEP 30.4, Руководство пользователя

Результаты поиска

Содержание Rexroth IndraControl VEP 30.4

Отзывы:

Похожие инструкции для Rexroth IndraControl VEP 30.4

Бренды по названию

Популярные бренды