Bosch Rexroth IndraControl VEP 30.4, Руководство пользователя

Страница: 91 / 142

LED status On Communication is running
Off No communication
Fig.7-17: Status and diagnostic displays of the Ethernet interface
VEP ATOM devices The VEP ATOM devices feature an Ethernet interface ("XETH"), which can be
operated with 10/100 MBit and 1 GBit.
Status and diagnostic displays of
the VEP ATOM devices
LED link On Connection to network is available
Off No connection
Flashing Communication is running
LED Speed green 100 MB
Off 10 MB
yellow 1 GB
Fig.7-18: Status and diagnostic displays of the Ethernet interface
7.2.7 SERCOS III Interface X7S1 and X7S2
The SERCOS interface is only available for VEP MLP devices.
With these SERCOS III interfaces the device can be connected to the SERCOS
bus devices.
RJ45, female connector, 8-pin
Type Ethernet 10 Base T / 100 Base X
Cable length Maximum 100 m
Cable type Shielded, twisted pair
Transmission rate 10 or 100 MBit/s
Fig.7-19: Ethernet network connection
Fig.7-20: Pin assignment of the SERCOS interface
Status and diagnostic displays
LED link On Connection to network is available
Off No connection
LED status On Communication is running
Off No communication
Fig.7-21: Status and diagnostics displays of the SERCOS interface
DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal Bosch Rexroth AG 89/139
Pin Assignments