Bosch Rexroth IndraControl VEP 30.4, Руководство пользователя

Страница: 92 / 142

7.2.8 SERCOS III Interface X7S3 and X7S4
The SERCOS interface is only available for VEP MLP devices
With these SERCOS III interfaces the device can be connected to the SERCOS
bus devices.
RJ45, female connector, 8-pin
Type Ethernet 10Base T / 100Base X
Cable length 100 m max.
Cable type Shielded, twisted pair
Transmission rate 10 or 100 MBit/s
Fig.7-22: Ethernet network connection
Fig.7-23: Pin assignment of the SERCOS III interface
Status and diagnostic displays
LED link On Connection to network is available
Off No connection
LED status On Communication is running
Off No communication
Fig.7-24: Diagnostic display of the SERCOS interface
7.2.9 Fieldbus Module
PROFIBUS Interfaces X7P
This interface is only available for IndraControl VEP **.4 devices
with PROFIBUS configuration.
PIN Signal designation PIN Signal designation
1 RGND – reference potential 2 NC
3 RxD/TxD-P – transmit/receive 4 NC
5 DGND – reference potential 6 VP - supply voltage - Plus
7 NC 8 RxD/TxD-N – transmit/receive
9 NC - -
Fig.7-25: Pin assignment of the DP-M X7P PROFIBUS Master interface
Bosch Rexroth AG DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal
90/139
Pin Assignments