Bosch Rexroth IndraControl VEP 30.4, Руководство пользователя

Страница: 120 / 142

Click Calibrate on the left side and touch exactly each of the five calibration
points with a touch pen. Then confirm the calibration with OK.
Switching-over from "left mouse button" to "right mouse button" is done in Win‐
dows XP Embedded operating system by activating the mouse icon in the
taskbar, see the following figure. Switching-over the mouse button applies only
for the following "click" on the touch screen.
Fig.9-41: Icon for switching-over the mouse buttons
Danger of destruction of the touch screen if
operated with inappropriate objects (e.g.
screwdriver).
NOTICE
Operate the touch screen only with your finger or with a touch pen.
Text input via virtual keyboard
To enter texts a virtual keyboard can be used, which is operated via the touch
screen. In order to call this keyboad manually, click on Start ▶ Pro‐
grams ▶ Accessories ▶ Accessibility ▶ On-Screen Keyboard or use the link in
the quick start bar, see fig. 9-42 "On-Screen Keyboard in the quick start bar"
on page 118
Fig.9-42: On-Screen Keyboard in the quick start bar
9.3.4 Configuration of Remote Engineering
General Information
Generally, via the IndraControl VEP **.4 device a running machine or a plant
is operated and monitored (in the following sections this plant or machine is
designated as "operating station"). To do so, the IndraWorks user interface is
started. IndraWorks gets the project planning data from an IndraWorks project
of the operating station. This project is processed and modified with the
IndraWorks project planning user interface.
"Remote Engineering" allows to use the project planning user interface on a
separate computer, connected to the operating station via a network.
For working in the "remote engineering mode" the required steps are:
1. At the operating station:
Enable "Remote Engineering".
2. At the project planning station:
1. Connect to operating station
2. Open and edit a project on the operating station
3. Save the project
4. Disconnect from operating station
Bosch Rexroth AG DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal
118/139
Software