Bosch PSG 3000 Series, Инструкция по сборке и эксплуатации

Страница: 32 / 114

PSU 5000 / PSG 3000
Instructions for Assembly and Operation
Technical
data
1070 078 224--108
5--1
5 Technical data
5.1 Technical data of the PSU standard types
5.1.1 Electrical data
Mains
PSU 5100.1XX
1)
PSU 5100.2XX
1)
3--phase; 400 VAC,--20% to 480 VAC,+10%;
continuous thermal
current
220 A
50 or 60 Hz
PSU 5200.2XX
PSU 5200.1XX
3--phase; 480 VAC,--20% to 690 VAC,+10%;
50 or 60 Hz
1): Air--cooled design also available
110 A
PSU 5300.1XX
1)
220 A 110 A
PSU 5100
PSU 5200
parallel connection of
2 x PSG 3100.00 A;
current range:
9 to 54 kA
1 kHz or 1.2 kHz
There must be at least 1 cycle cool time between the weld times (max. 50 cycles) if secondary current
control is used. With primary current control, a continuous current can be applied.
PSG 3200.00 A;
current range:
6 to 40 kA
refer to section 11, Electrical connection
PSG 3100.00 A;
current range:
3 to 18 kA
PSU 5300: 6 to
36 kA
PSG 3050.xx A;
current range:
3 to 18 kA
PSG 3075.00 A;
current range:
3 to 18 kA
Transformer 1 Transformer 2 Transformer 3 Transformer 4 Transformer 5
PSU 5300
Output power
Cycle frequency
Weld time
Can be matched by DIP switch to
Connections
Can be machted by DIP switch to
5.1.2 Inverter losses
PSU 5100 L
Basic switch
cabinet loss
69 W
PSU 5100 W PSU 5200 W PSU 5300 L PSU 5300 W
Loss with max.
power includ-
ing basic loss
170 W 110 W 210 W 170 W 110 W
L: air--cooled, W: water--cooled
Water
Air
max. 700 W
PSU 5100
PSU 5200
max. 420 W
PSU 5300
max. 360 W
--
max. heat sink loss dissipated by the water or air