Bosch NWC?0495, Руководство по установке

Страница: 36 / 99

EN | 35
Bosch Security Systems | 2006-05 | V2.0
Dinion IP
| Installation Manual
Saving changes
After making changes in a window, click the Set button to send the new settings
to the unit and save them there.
Note
Save the changes made in each window by clicking Set. Clicking the Set
button saves only the settings in the current window. Changes in any other
fields are ignored.
Click on the Settings link at the top of the window to close the window without
saving the changes made.
General Settings
Various basic data for the camera can be set or selected here.
Camera identification
Camera name
The camera can be assigned a name to assist in identifying it. The name
simplifies the management of multiple devices in more extensive systems, for
example using the VIDOS software.
Note
The camera name is used for remote identification of a unit, in the event
of an alarm for example. Enter a name that makes it as easy as possible to
identify the location unambiguously.
Camera ID
Each camera should be assigned a unique identifier that can be entered here as
an additional means of identification.