EN
| 48
Bosch Security Systems | 2006-05 | V2.0
Dinion IP
| Installation Manual
Note
If Sensitivity Up is active, some noise or spots may appear in the picture.
This is normal camera behavior. Sensitivity Up may cause some motion
blur on moving objects.
Gain
In AGC mode the camera automatically sets the gain to the lowest possible value
needed to maintain a good picture. Select the maximum value the gain can have
during AGC operation (0, 1, ... 26).
In FIXED mode the gain is set at a predefined not scene dependent value. Select
the gain setting (0, 1, ... 26).
Day/Night
The Dinion IP Day/Night camera is equipped with a motorized IR filter. The IR
filter can be removed in low-light or IR illuminated applications. There are four
different methods of switching:
• via the alarm input,
• as part of the programmable mode profile,
• automatically, based on the observed light levels, or
• via the settings page.
If Auto switching mode is selected, the camera automatically switches the filter
depending on the observed light level. The switching level is programmable. Set
the video level at which the camera switches to monochrome operation (-15 to 0
to +15). In monochrome mode the IR filter is removed, giving full IR sensitivity.
Содержание NWC?0495
Страница 1: ...Dinion IP NWC 0495 Installation Manual IP Day Night Camera EN ...
Страница 11: ...EN x Bosch Security Systems 2006 05 V2 0 Dinion IP Installation Manual ...
Страница 97: ...EN 96 Bosch Security Systems 2006 05 V2 0 Dinion IP Installation Manual ...
Страница 98: ...Bosch Security Systems 2006 05 Dinion IP Installation Manual ...