Bosch NWC?0495, Руководство по установке

Страница: 66 / 99

EN | 65
Bosch Security Systems | 2006-05 | V2.0
Dinion IP
| Installation Manual
Video input
The number of the video input is displayed for information purposes.
• Select the required data stream from the list field.
Type of recording
Select the required recording type.
In the case of Ring mode the recording proceeds continuously. If the maximum
hard drive space has been reached, the oldest recordings are automatically
overwritten.
In the case of Linear mode the recording proceeds until the entire hard drive
space is full. The recording is then stopped until old recordings have been
deleted.
Recording profile
Select the profile that is to be active during recording. You can view and modify
the parameters for the profile (see MPEG-4 encoder, from page 43).
Note
The recording profile can deviate from the standard setting Active profile
for the video input set and is only used during an active recording.
Number of alarm tracks
Select the number of alarm tracks to be used in the partition. One alarm event
can be recorded in each alarm track. Accordingly, the number of alarms entered
can be recorded and archived. A partition can contain a maximum of 128 alarm
recordings.
If the option Ring mode (see page 65) is set for a partition, the latest alarm
recordings are always saved in the preset number. If the option Linear mode is
selected, the recording is stopped as soon as the total number of alarm tracks has
been recorded.
Already Used alarm tracks are displayed in the graphic next to the parameter.
Alarm recording
Select which time intervals are to be covered for Pre-alarm and Post-alarm.