Bosch NWC?0495, Руководство по установке

Страница: 29 / 99

EN | 28
Bosch Security Systems | 2006-05 | V2.0
Dinion IP
| Installation Manual
Digital I/O
Depending on the configuration of the unit, the alarm input and the relay output
are displayed next to the camera image. The alarm symbol is for information and
indicates the input status of the alarm input: Active 1 = Symbol is green, Active 0
= Symbol not lit. The relay on the camera allows you to operate a device (for
example a light or a door opener).
– To operate, click the relay symbol next to the video image. The symbol is red
when the relay is activated.
System log / Event log
The System log field contains information about the operating status of the
camera and the connection. These messages can be saved automatically in a file.
Events such as the triggering or end of alarms are shown in the Event log field.
These messages can be saved automatically in a file.
Saving snapshots
Individual images from the video sequence that is currently being shown on the
Livepage can be saved in JPEG format on the computer's hard drive.
– Click the camera icon to save single images.
– The image is saved at a resolution of 704 × 576/480 pixels (4CIF). The
storage location depends on the configuration of the camera.
Recording video sequences
Sections of the video sequence that is currently being shown on the
Livepage
can
be saved on the computer's hard drive. The sequences are recorded at the