EN
| 30
Bosch Security Systems | 02 April 2004
LTC 8850 |
Instruction Manual
|
Allegiant Server
•
Paste -
Pastes data from the clipboard into the
cells.
Toolbar button:
•
Delete -
Sets the values of the selected cells to their
empty state.
•
Select All -
Selects all cells in a table.
3.2.4.3 Transfer Menu
•
Upload -
A dialog box appears for a selection of
tables to upload. The dialog box contains a check
box for each table (Camera table, Monitor table,
etc.). All tables that have the box checked will be
uploaded from the Allegiant system into the
Allegiant Server configuration tables. The menu
item is disabled when the Allegiant system is not
online.
Toolbar button:
•
Download -
A dialog box comes into view for a
selection of tables to download. The dialog box
contains a check box for each table (Camera table,
Monitor table, etc.). All tables that have the box
checked will be downloaded from the Allegiant
Server configuration tables to the Allegiant system.
The menu item is disabled when the Allegiant
system is not online.
Toolbar button:
•
Communication Setup
- Presents a dialog box for
setting up the PC Serial Port communication
parameters. Use this to select the appropriate serial
port (COM1, COM2 etc.), and to set the
communication parameters' baud rate (stop bits,
etc.) to match those of the Allegiant Console port.
See SECTION 3.2.3,
Going Online.
The communication parameters can only be
changed when the Allegiant system is not online.
This selection is therefore disabled when the
Allegiant system is online.
Toolbar button:
3.2.4.4 Online Menu
•
Auto Set \ Video Loss Configuration
- Instructs
the Allegiant System to initialize its video-loss
monitoring table based on the current valid video
inputs.
•
In addition to video loss information being
presented in the Real Time Status part of the
program the Monitor Table and the Keyboard
Table offer configuration options when using this
feature too. Refer to the appropriate section for
more details.
After being enabled using the
Auto Set/Video Loss
Configuration
menu option, the alarm output relay
corresponding to the monitor number that is
displaying a channel without video will activate in
response to video loss events. The relay will also
activate if a channel with no video is manually
selected for viewing on the monitor.
When using LTC 8100, LTC 8200 and LTC 8300
Allegiant system, the alarm output relays are found
on the rear panels of the enclosures. When using
other Allegiant models, the alarm output relays are
provided by the LTC 8540 Alarm interface
accessory unit.
Auto Set \ Date Time -
Presents a dialog box to
allow automatic setting of the Allegiant System time
and date.
•
Diagnose \ Alarm -
Presents a dialog box to allow
simulation of Allegiant alarms. The dialog box
contains a list box for selection of the alarm to
simulate and Activate and Deactivate buttons.
When Activate is selected, the alarm is actually
generated in the Allegiant system.
IMPORTANT:
Every Activate should be followed
by a matching Deactivate. If the alarm is fully
acknowledged, it may appear as if the alarm is no
longer active in the system, but the Deactivate is
still required! When in doubt, issue an extra
Deactivate command. Extra Deactivate commands
do nothing.
•
Broadcast -
A dialog box appears to enter a
message for broadcasting to all of the Allegiant
monitors. The broadcast message will appear for
the duration specified in the
Parameters |
Miscellaneous
table.
•
Go Online -
Attempt to go online with the
Allegiant system using the PC serial port
parameters as currently set up in the
Transfer |
Communication Setup
dialog.
Toolbar button:
