GPRS/GSM IP Communicator
Firmware Upgrade | en
35
Bosch Security Systems, Inc.
Installation and Operation Guide
F01U163066 | 01 | 2010.05
6
Firmware Upgrade
To upgrade the firmware in the ITS-DX4020-G, you must download the latest firmware file
from the Bosch Web site to the target PC or laptop, and then use either Hyper Terminal or
Tera Term to install the firmware file on the ITS-DX4020-G.
6.1
Download the Latest Firmware
1.
From your Internet browser, go to
http://www.boschsecurity.com
to open the Bosch
Web site.
2.
Select the web site for your region and country.
3.
In the
Online Catalogs
section on the left, click the
Intrusion Alarm Systems
link.
4.
Under the
Intrusion Alarm Systems Products
heading, scroll to the
Conettix -
Information Transport Solutions
section. Click the
Show product section
link.
5.
CLick the
Conettix IP
link.
6.
Scroll to the
ITS-DX4020-G GPRS/GSM IP Communicator
section. Click the section title
to open the product page.
7.
Under the product image, click the
Software
tab.
8.
Click
OK
to accept the license agreement.
9.
To the right of
ITS-DX4020-G bin
, click on the language link (for example,
en
).
The
File Download
dialog box opens.
10. Click
Save
to save the file to the target PC or laptop.
6.2
Install the Firmware
6.2.1
Install the Firmware using Hyper Terminal
Microsoft includes Hyper Terminal with the Windows XP operating system and earlier
operating systems.
1.
Ensure that the USB-to-mini-USB cable is connected to the ITS-DX4020-G and the target
PC or laptop.
2.
Short the CONFIG MODE jumper pins with the supplied jumper plug.
3.
Start Hyper Terminal by selecting
Start>(All)
Programs
>
Accessories
>
Communications
>
Hyper Terminal
.
4.
Set up a connection on the new virtual serial COM port (for example, Port: COM4:
ITS-DX4020-G (COM4) using the following settings:
–
Baud rate:
9600
–
Data bits:
8
–
Parity:
None
–
Stop bits:
1
–
Flow control:
None
To determine which COM port is used by the ITS-DX4020-G:
a.
From your desktop, click
Start.
b.
Right-click
My Computer
, and select
Properties
.
c.
Select the
Hardware
tab, and click the
Device Manager
button.
d.
In the
Device Manager
list, scroll to
Ports (COM & LPT)
.
NOTICE!
To install the firmware, the CONFIG MODE jumper pins must be shorted together with the
supplied jumper plug. Refer to
, for LED activity.
Содержание ITS-DX4020-G
Страница 1: ...GPRS GSM IP Communicator Conettix ITS DX4020 G en Installation and Operation Guide ...
Страница 2: ......
Страница 51: ......
