Bosch DDU 7, Руководство пользователя

Страница: 129 / 156

Display Unit DDU 7 Lap Trigger | en 129
Bosch Motorsport Manual 04.02.2019 | V 02 |
Choose the signal channel for the
trigger signal
Choose the signal device for the
trigger signal
Choose the source for vehicle
speed
Enter the distance of the racetrack
Notice!
In this example, the Rx is connected to the dedicated lap trigger pin of DDU 7. The channel
‘speed’ is calculated from 4 wheel speeds.
3. Click ‘Finish’ to complete the operation.
A pre-configured lap trigger window opens.
a) Change signal device, if desired.
b) Change signal channel, if desired.
c) Choose signal threshold. See chapter ‘Electrical trigger signal’ for details.
d) Define threshold of input channel signal when trigger is released. Only possible if no digital source is
selected as signal source.
e) Define settings for lap timing (main trigger). See chapter ‘Lap timing’ for details.
f) Define settings for segmented timing (sub trigger). See chapter ‘Segment timing’ for details.
g) Define settings for countdown timer. See chapter ‘Countdown timer’ for details.
h) Change signal for vehicle speed, if desired.
i) Enter minimum speed for trigger release.
j) Define settings for distance based retrigger protection. See chapter ‘Distance based retrigger
protection’ for details.
k) Define settings for distance based forced trigger. See chapter ‘Distance based forced trigger’
for details.
l) Define presettings for trigger. See chapter ‘Lap trigger presettings’ for details.